|
|
GD-401
Moly Treatment
for Gear Oils
Includes Synthetic and GL-5 Hypoid
|
- Applications
-
GD-401 Moly Treatment for Gear Oils is a multipurpose
treatment for all grades of oils, including motorcycle final drives (hypoid GL-5).
It may also be used as a treatment to standard transmissions, differentials, and
other applications calling for gear oil. NOT RECOMMENDED WITH LIMITED SLIP
DIFFERENTIALS AND WET CLUTCHES.
- Benefits
-
GD-401 Moly Treatment for Gear Oils imparts the
benefits of moly into plain gear oil.
GD-401 is a blend of moly and other chemicals.
Moly is a solid film lubricant with a low coefficient of friction
and an affinity for steel and other metals. The moly decreases
friction of the two counter-moving sliding surfaces of gear teeth
by filling in microscopic pores of the metal surfaces and plating
out over the surface. Guard Dog lessens metal-to-metal
contact to reduce friction and wear.
|
|
|
- Typical Observations
-
GD-401 Moly Treatment for Gear Oils is a
proprietary formula of molybdenum compounds plus other additives. The
carrier is a 90 weight mineral oil. The flash point is greater than 399°F (ASTM* D 93 PMCC).
The particle size range of the moly is 0.1 - 1.0 microns (median 0.8).
- How To Use
-
Per 1 quart of oil, replace 4 oz. of plain oil with 4 oz. of Guard Dog. (The mixture ratio is 1:8.
For example, 1 gallon of gear oil (8 pints) requires taking out 1 pint of oil and replacing it
with 1 pint (16 oz.) of Guard Dog.)
- Packaging
-
|
|
|
|
|
| 8 oz. bottle |
GD-401-008 |
Case of 12 each 8 oz. bottles |
GD-401-008-12 |
| 1 gallon bottle |
GD-401-708 |
Case of 4 each 1 gallon bottles |
GD-401-708-04 |
- Warranty and Safety
-
Guard Dog Moly Lubricants, Inc. warrants GD-401 to conform to
published typical observations. Containers have a tamper-proof/child
resistant cap. GD-401 is safe to use when normal precautions are taken,
as with any petroleum product. GD-401 does not contain solvents or
chlorinated paraffin. A Material Safety Data Sheet is available
upon request.
|
|
